Sibre
USB
Service brakes
USB5 V
Braking torque:
6.000 – 29.000 Nm,
Peak height:
280 mm,
Weight:
285 kg
Description
- Brake linings made of sintered material with standard brake disc material S355J2G3.
- The specified braking torques are based on an average friction coefficient µm = 0.4 with ground and optimally conditioned brake linings, up to a sliding speed of 60 m/s. Deviations in parameters may reduce the friction coefficient.
- Please contact us when using thrusters with lifting and/or lowering valves.
- Weight without air device: 285 kg.
- Air device position: For 500/7 as shown, all others rotated by 180°.
- Available options:
- Special design for low and high ambient temperatures
- Manual release
- Inductive sensors for indicating “brake open”, “brake closed”, and/or “pad wear”
- Temperature sensor for brake linings
- Load cell for monitoring clamping force
Service brakes
USB 5 III
Braking torque:
3.500 – 26.000 Nm
Peak height:
370 mm
Weight:
250 kg
Description
- Brake linings are composed of sintered material paired with standard brake disc material S355J2G3.
- The specified braking torques assume an average friction coefficient of µm = 0.4 with ground and optimally conditioned brake linings, effective up to a sliding speed of 60 m/s. Deviations in parameters may alter the friction coefficient.
- Please contact us if using thrusters with lifting and/or lowering valves.
- Weight without air device: 250 kg.
- Options available:
- Custom design for low and high ambient temperatures
- Manual release
- Inductive sensors to indicate “brake open”, “brake closed”, and/or “pad wear”
- Temperature sensor for brake linings
- Load cell for monitoring clamping force
Service brakes
USB 5 II
Braking torque:
1.300 – 9.800 Nm
Peak height:
280 mm
Weight:
175 kg
Description
- Brake linings made from sintered material with standard brake disc material S355J2G3.
- The specified braking torques are calculated assuming an average friction coefficient of µm = 0.4 with ground and optimally conditioned brake linings, effective up to a sliding speed of 60 m/s. Variations in parameters may decrease the friction coefficient.
- Please get in touch with us if using thrusters with lifting and/or lowering valves.
- Weight without air device: 175 kg.
- Options available:
- Custom design for low and high ambient temperatures
- Manual release mechanism
- Inductive sensors for indicating “brake open”, “brake closed”, and/or “pad wear”
- Temperature sensor for monitoring brake linings
- Load cell for monitoring clamping force
Service brakes
USB 5 I
Braking torque:
550 – 5.500 Nm
Peak height:
230 mm
Weight:
85 kg
Description
- Brake linings made of sintered material paired with standard brake disc material S355J2G3.
- The specified braking torques are calculated assuming an average friction coefficient of µm = 0.4 with ground and optimally conditioned brake linings, effective up to a sliding speed of 60 m/s. Deviations in parameters may decrease the friction coefficient.
- Please reach out to us if using thrusters with lifting and/or lowering valves.
- Weight without air device: 85 kg.
- Options available:
- Custom design for low and high ambient temperatures
- Manual release feature
- Inductive sensors for indicating “brake open”, “brake closed”, and/or “pad wear”
- Temperature sensor for brake linings
- Load cell for monitoring clamping force
Service brakes
USB 5 05
Braking torque:
110 – 1400 Nm
Peak height:
160 mm
Weight:
46 kg
Description
- Brake linings made from sintered material with standard brake disc material S355J2G3.
- The specified braking torques are calculated based on an average friction coefficient of µm = 0.4 with ground and optimally conditioned brake linings, effective up to a sliding speed of 60 m/s. Deviations in parameters can decrease the friction coefficient.
- Please get in touch with us if you are using thrusters with lifting and/or lowering valves.
- Weight excluding thruster: 39 kg.
- Options available:
- Custom design for low and high ambient temperatures
- Manual release mechanism
- Inductive sensors to indicate “brake open”, “brake closed”, and/or “pad wear”
- Temperature sensor for brake linings
- Load cell for monitoring clamping force
COMPACT
Service brakes
COMPACT CB8 / CB6
Description
Disk Brake CB8 featuring an electrohydraulic thruster EDC 100, available with either solenoid or hydraulic cylinder options.
Disk Brake CB6 equipped with thruster EDC 100/30, fail-safe operation, electro-hydraulic release, and sintered linings as standard.